Skip to main content

Quality problems on second try. Please, advise on the attached sample.

  • Angela Serrano #830202147
      2

    Hi Esteban!

    Thanks for sharing your recording.

    I was comparing this to the last one you submitted and it sounds much much better! The distortion is not there as much as it was before and the hiss was also reduced a lot. More likely, the hiss was coming from the excess gain you had added.

    To me, the recording sounds with a boost on the mid frequencies which makes you sound nasal. I suggest you position yourself a bit farther away from the microphone and to change the positioning. You can point the capsule more towards the lower half of your mouth instead of the higher part + nose to avoid part of this sound.

    I also could sense a lot of editing clips. When editing, you should make sure you're adding fades in/out at the beginning/ending of the cut. This will transition the section smoothly into the next section making it sound as natural and clear as possible.

    Hope this helps!

    share share
  • Esteban Izquierdo #8392399868
      1

    Thank you very much Angela for your feedback!

    I'm going to put into practice the advice he has given me and I'll come back with the sample to see what it looks like.

    I want to be part of his team and while I can, I'm going to do everything I can to reach the best possible level of quality. I don't want to be dizzy with one sample after another, but I want to be sure that next time I will meet your expectations.

    The resources I have are not the best, but if I can get into the team, I will reinvest the income in the acquisition of an increasingly professional equipment.

     

    Any other suggestions you may give me will be welcome.

     

    Best regards!

    share share
  • Angela Serrano #830202147
      0

    That's awesome, Esteban

    We would love to have you in our team as well! Looking forward to your new take and please feel free to share as many as you want :) 

    share share

Please sign in to leave a comment.