reinstatement
https://soundcloud.com/user-889322043/reinstatment-test-file/s-GcvDW
Juan, In taking into account our previous conversation I still felt there were issues so I went back and started from ground zero, and reinstalled my daw, there seemed to be some type of connectivity issue or corruption not sure which was the culprit, But I think this is much better.
Please sign in to leave a comment.
Hi Scott
The file sounds very processed with a noise reduction plugin and has some hiss noise that is also highly impacting the recording. Can you let us know which equipment you're using to record and also share a 100% raw file?
Juan and Angela I took my issues to a sound engineer and feel we have them resolved, here is a link to the new file: https://soundcloud.com/user-889322043/scott-2-26-18/s-71ue0
Hi Scott
The recording still sound with quite some hiss and highly processed. Can you please remove any processing you're using and share a 100% raw recording? It could also help us a lot to know which equipment you're using to record. Like microphone, interface, any preamps, etc.
https://soundcloud.com/user-889322043/north-american-demo/s-qW7JL
Here you go Angela, after continuing to work with an engineer I'm providing a fresh sample as far as equipment goes I provided that info before but I'll provide again:
Neumann tlm 102 -->dbx286s--> Presonus audiobox --Reaper daw
Hi Scott!
I think this last take sounds pretty good. Perhaps the only thing I'd try, would be to cut a bit of the low frequencies to make the words easier to follow, without removing that nice low end of the voice.
Best,
Juan
So does this mean mine profile can be re-instated
Hi Scott!
Before we can reinstate your account we would appreciate if you can try fixing the issue with the lower frequencies that Juan Santiago mentioned. We're almost there!
https://soundcloud.com/user-889322043/north-american-demo-revision/s-7y0sr
Ok I add an eq this time, the previous was straight voice no eq
Hi Scott
Now the recording sounds a bit too filtered. If you're adding a high pass, try to lower the frequency you're filtering in and remove any other filter you're having.
If this doesn't work. I would say to please toss the filter out and try to record a bit farther from the mic. This could reduce the boominess as well!